USAfixTM - Repair Guide (RG) - Master

Email RG

- Check for power to the brush switch

Level of Difficulty - Medium	Estimated Completion Time - 10 minutes
TASKI - ERGODISC 200
	Tools Required Tool   Screwdriver-phillips Volt meter (True RMS capable)
	Parts Required

Step   Procedure & Parts & Tools 1 REMOVE THE 6 SCREWS HOLDING THE HANDLE COVER. Screwdriver-phillips 2 PULL HANDLE COVER FROM MACHINE. 3 LOCATE THE BRUSH SWITCH WIRE CONNECTORS 4 INSERT LEADS INTO THE 2 BLACK WIRE CONNECTORS. SET THE VOLT METER TO VOLTAGE. VOLT METER SHOULD READ APPROX. 120 VOLTS. IF BRUSH SWITCH IS OKAY, RECONNECT WIRE CONNECTORS AND REASSEMBLE THE HANDLE COVER. Volt meter (True RMS capable)